What you need:
1. Phillips screwdriver
2. Tools panel
3. Pick Tools
4. Lampshade
5. Corset
6. Duct Tape
7. Wire Cutter
8. Crimpers
9. Covers
Note: Remove the old stereo before you start!
For more information:
You must disconnect the battery, because you do not want the power, if you lose the installation with the officers. It can also prevent injuries inTrial.
Take all the hardware that came in the box.
You need to disassemble the speakers of the factory. Instructions for the regulation of factory speakers should come in the manual with the machine arrived. If you can not find this guide, I would suggest calling the department.
Steps
o To begin, you'll need a flathead screwdriver. With this tool you can take the old vines, with those screws that secure the old factory speakers.
Or will it be necessaryDisconnect the wires from the cigarette lighter socket. It will help you install the other speakers.
O Connect the cable to the cigarette lighter.
Or you must have the ignition and then select the cable that is located under the dashboard.
O Stick Tester light on the source of ignition. The light comes on.
O is now necessary to perform the electrical, which is eyed stereo. These forces lead to the stereo. You will then wrap the cable with ablack electrical tape so that it does not affect the metal surface.
Related : Lowest Price iPod Lowest Price iPod
